Hogwarts Hooded Towel

Around Christmas time last year, my husband and I reached the firm conclusion that our Little One had outgrown his infant bath towels. It was time for an upgrade. There are many hooded towels out there. However, we wanted one that would fit with our Harry Potter nursery. So I headed over to Pinterest to see what I could find. I did find this great tutorial over at Rae Gun Ramblings. However I wanted something more Hogwarts themed and less Harry Potter specific. So I came up with my own pattern for a Hogwarts hooded towel!

If you are a new sewer, check out my beginners guide to sewing terminology.

Disclaimer: This blog post contains affiliated links. As an Amazon associate I earn from qualifying purchases. If you use them, I might be rewarded credit or a commission of the sale. Please note that I only recommend what I personally use and love and I always have my readers best interest at heart .

Supplies and Materials

This was a fairly simple project to make, but first I needed to gather my supplies.

I used the following supplies to make this Hogwarts hooded towel.

  • Sewing Machine
  • Scissors
  • Pins
  • Cutting Mat
  • Ruler
  • Hand Needle

We chose to make our Hogwarts hooded towel just a Hogwarts towel instead of picking a house. Little One isn’t 11 yet…we will have to wait to see what house he is in (I know, we are dorks).

Supplies for Hogwarts hooded towel.

Assembly

The first step in making this Hogwarts hooded towel is making the scarf that goes along of the edge of the robe. I first decided to put this scarf on the robe to be like the striped house scarves that the students wear. However, being that we didn’t want it house specific, we chose this crest fabric instead.

Cut the fabric in a 4 inch strip (or wider depending of the thickness of the scarf you want). Depending on the length of your towel, you may have to cut two pieces and stitch them together, like I did in the photo below.

making scarf for Hogwarts hooded towel

Next, line up the fabric along the side, 3 1/2 inches in from the edge, right sides together, as pictured below. Stitch along the side closest to the edge of the towel. Be sure to back stitch at the beginning and end, leaving 1/2 inch open on the bottom and top for turning.

Sewing on scarf on Hogwarts hooded towel

Turn the scarf over and press down with an iron. Turn in the raw edges along the edge of the towel using the iron. Pin and stitch down around the entire scarf section. I did two layers of stitching – one at 1/4 inch seam allowance and another at 3/8 inch seam allowance.

Sewing Hood

To make the hood part of the Hogwarts hooded towel, take the towel and cut it in half so you have two near square pieces. You can cut some off the side you cut depending on how big you want the hood to be. I cut around two inches off.

cutting hood on Hogwarts hooded towel

Next, fold the towel in half and stitch along the edge, forming the hood as pictured below. I would suggest doing a tight zig zag or serge along this edge to keep it from fraying. Next, zig zag or serge along the non pointed end of the towel if that is a raw edge, as well.

Cutting hood on Hogwarts hooded towel

Attach the hood to the towel at its center front. Using pins to pin down, use a stitch along the edge.

Sewing the hood

The final step in this process is to attach the patch on to the robe. Follow the instructions provided with the patch you purchased. I do suggest even if the patch is an iron on, secure it with a couple stitches, as well. Towels tend to go through the wash a lot, so the extra stitching will help it stay secure.

That’s it, you now have a completed Hogwarts hooded towel! All in all it’s a relatively simple sewing project. Let me know what you think about this in the comments below!

Hogwarts Hooded Towel

Leave a Reply

avatar
  Subscribe  
Notify of